Netgear FSM7326P – 24 + 2 L3 Managed 10/100 Switch with Power-over-Ethernet Guia Da Instalação
Version 1.0
FURTHER NOTES
Testing
Testing can be performed by connecting a Wireless client to each of the SSID alternatively (i.e.
VLAN2, VLAN3) and try to ping a device in the VLAN associate to such SSID.
Ensure the Wireless client obtains an IP address from a DHCP server or hard-code an IP address
relevant to the VLAN the Wireless client will be connecting to.
In this scenario, when connecting to VLAN2, the Wireless client should obtain the TCP/IP settings
from the DGFV338 DHCP server and be able to ping the DGFV338 LAN address; if available the
Wireless client should also be able to access the Internet
Testing can be performed by connecting a Wireless client to each of the SSID alternatively (i.e.
VLAN2, VLAN3) and try to ping a device in the VLAN associate to such SSID.
Ensure the Wireless client obtains an IP address from a DHCP server or hard-code an IP address
relevant to the VLAN the Wireless client will be connecting to.
In this scenario, when connecting to VLAN2, the Wireless client should obtain the TCP/IP settings
from the DGFV338 DHCP server and be able to ping the DGFV338 LAN address; if available the
Wireless client should also be able to access the Internet
Managing devices
DGFV338
The unit will be managed via a device (wired or wireless) connected to VLAN2 only
WNDAP330
The unit will be managed, upon being configured, from a device (wired or wireless)
connected to a port in VLAN1 on the Layer2/Layer3 switch as VLAN 1 is the
management VLAN for the Access Point
connected to a port in VLAN1 on the Layer2/Layer3 switch as VLAN 1 is the
management VLAN for the Access Point
Layer2/Layer3 switch
The unit will be managed connecting to a port in VLAN1, as this is the management
VLAN
VLAN