Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point Manual Do Utilizador
Management and Monitoring
81
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
An ensemble can be formed between two more APs if the following conditions are met:
•
The APs are of the same model.
•
The APs use the same country or region settings and the same radio mode.
•
The APs are connected on the same bridged segment.
•
The ensemble names of the APs that are joining are the same.
•
Ensemble mode is enabled on all APs.
Configure and Enable Ensemble Mode
To configure and enable ensemble mode on the access point:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Select Configuration > Ensemble > Basic > General.
5.
In the Ensemble Name field, enter the ensemble name.
6.
In the AP Name field, enter a custom name for the access point or use the default name.
7.
In the Priority (0 - 255) field, enter the access point’s priority in the ensemble.
The lowest-numbered AP becomes the master AP.
8.
To enable ensemble mode, select the Start radio button.
9.
Click the Apply button.
Your settings are saved.