Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point Manual Do Utilizador
Advanced Configuration
95
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Configure IPv6 Settings
The access point supports IPv6. You can manage the access point from an IPv6 address.
The access point can also function as an IPv6 DHCP client.
The access point can also function as an IPv6 DHCP client.
Note:
For information about how to configure the IPv4 settings, see
WARNING:
If you enable the DHCP client, the IP address of the access point
changes when you click the Apply button, causing you to lose your
connection to the access point. You then must use the new IP
address to reconnect to the access point.
changes when you click the Apply button, causing you to lose your
connection to the access point. You then must use the new IP
address to reconnect to the access point.
Tip:
If you enable the DHCP client on the access point, you can discover
the new IP address of the access point by accessing the DHCP server
on your LAN, or by using a network IP address scanner application.
the new IP address of the access point by accessing the DHCP server
on your LAN, or by using a network IP address scanner application.
To configure the IPv6 settings:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Select Configuration > IP > IPv6 Settings.