Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

802.1AS Port Settings

Use the 802.1AS Port Settings page to configure and view per-port 802.1AS settings. To 
display the 802.1AS Port Settings page click the Switching tab, then click 802.1AS 

 

Advanced 

 802.1AS Port Settings.

\

To configure the 802.1AS port settings:

To configure 802.1AS settings for one or more ports, click PORTS. To configure 

802.1AS settings for one or more LAGs, click LAGs. To configure 802.1AS settings for 

both ports and LAGs, click ALL.

Select the check box next to the port or LAG to configure. You can select multiple ports or 

LAGs to apply the same settings to the selected interfaces. Select the check box in the 

heading row to apply the same settings to all interfaces.

Enable or disable 802.1AS on the interface.

Set the Pdelay threshold. This value specifies the propagation delay threshold on the 

interface. The threshold determines whether the port is capable of participating in the 

802.1AS protocol. If the propagation delay on the interface is above the threshold you 

configure, the interface is not considered capable of participating in the 802.1AS 

protocol. The peer delay must be less than the threshold value configured on the interface. 

The default value is 2500 nanoseconds. The range is 0–1,000,000,000 ns.

Set the value for Allowed Lost Responses. If the interface does not receive valid responses 

to PDELAY_REQ messages above the value of the allowed lost responses, a port is 

considered to not be exchanging peer delay messages with its neighbor. The default value 

is 3. The range is 0–65535.