Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

Secure HTTP Configuration

Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer 
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using 
a Web interface, secure HTTP can help ensure that communication between the 
management system and the switch is protected from eavesdroppers and man-in-the-middle 
attacks. 

Use the Secure HTTP Configuration page to configure the settings for HTTPS 
communication between the management station and the switch.

To display the Secure HTTP Configuration page, click Security 



 Access, and then click the 



 HTTPS Configuration link.

 

To configure HTTPS settings:

Use the radio buttons in the HTTPS Admin Mode field to enable or disable the 

Administrative Mode of Secure HTTP. 

The currently configured value is shown when the Web page is displayed. The default 
value is Disable. You can only download SSL certificates when the HTTPS Admin mode 
is disabled.

Use the radio buttons in the SSL Version 3 field to enable or disable Secure Sockets Layer 

Version 3.0. The currently configured value is shown when the Web page is displayed. The 

default value is Enable.

Use the radio buttons in the TLS Version 1 field to enable or disable Transport Layer 

Security Version 1.0. The currently configured value is shown when the Web page is 

displayed. The default value is Enable.

In the HTTPS Port field, specify the TCP port to use for HTTPS data. The value must be in 

the range of 1–65535. Port 443 is the default value. The currently configured value is shown 

when the Web page is displayed.

In the HTTPS Session Soft Timeout field, specify the number of minutes an HTTPS 

session can be idle before a timeout occurs.