Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

To restore the configuration to a previously saved version:

Click the Maintenance tab and select the device with the configuration to restore.

Click Download Configuration.

From the Select a Configuration window that appears, navigate to and select the 

configuration file to download to the switch.

Click Open.

Optionally, you can schedule a different date and time to download the configuration file. 
To delay the download process, clear the Run Now? check box and enter a date and 
time to complete the download.

Enter the switch password and click Apply to begin the download process.

Click the Tasks tab to view status information about the 
configuration download.

Firmware Upgrade

The application software for the GS716T and GS724T Smart Switches is upgradable, 
enabling your switch to take advantage of improvements and additional features as they 
become available. The upgrade procedure and the required equipment are described in this 
section. This procedure assumes that you have downloaded or otherwise obtained the 
firmware upgrade and that you have it available as a binary file on your computer. This 
procedure uses the TFTP protocol to implement the transfer from computer to switch.

You can also upgrade the firmware using the TFTP Download and 
HTTP Download features mentioned in this book. See 

To upgrade your firmware:

Click the Maintenance tab, and then click the Firmware link directly below the tabs (see 

Select the switch to upgrade and click Download Firmware.