Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

To configure IP ACL interface bindings:

Select an existing IP ACL from the ACL ID menu.

The packet filtering direction for ACL is Inbound, which means the IP ACL rules are 
applied to traffic entering the port.

Specify an optional sequence number to indicate the order of this access list relative to other 

access lists already assigned to this interface and direction. 

A low number indicates high precedence order. If a sequence number is already in use 
for this interface and direction, the specified access list replaces the currently attached 
access list using that sequence number. If the sequence number is not specified by the 
user, a sequence number that is one greater than the highest sequence number currently 
in use for this interface and direction will be used. The valid range is 1–4294967295.

Click the appropriate orange bar to expose the available ports or LAGs. 

To add the selected ACL to a port or LAG, click the box directly below the port or LAG 
number so that an X appears in the box.

To remove the selected ACL from a port or LAG, click the box directly below the port 
or LAG number to clear the selection. An X in the box indicates that the ACL is 
applied to the interface.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

Click Apply to save any changes to the running configuration.

IP Binding Table

Use the IP Binding Table page to view or delete the IP ACL bindings.

To display the IP Binding Table, click Security 



 ACL, then click the Advanced 



Table link.