Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador
254
GS716T and GS724T Gigabit Smart Switches
To reboot the switch:
1.
Select the check box on the page.
2.
Click Apply to reset the switch immediately, or click Cancel to abandon the reset request.
After the switch reset begins, the management interface is not available until the switch
completes the boot cycle. After the switch resets, the login screen appears.
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
Note:
If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see
11.
To access the Factory Defaults page, click Maintenance
Reset
Factory Default.
To reset the switch to the factory default settings:
1.
Select the check box on the page.
2.
Click Apply, or click Cancel to abandon the changes. The switch resets immediately.