Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

The Dynamic Host Configuration table shows host name-to-IP address entries that the switch 
has learned. The following table describes the dynamic host fields:

Host 

Lists the host name you assign to the specified IP address.

Total

Amount of time since the dynamic entry was first added to the table.

Elapsed

Amount of time since the dynamic entry was last updated.

Type

The type of the dynamic entry.

Addresses

Lists the IP address associated with the host name.

Click Refresh to refresh the table with the most current data from the switch.

Click Clear to delete Dynamic Host Entries. The table will be repopulated with entries as they 
are learned.

Green Ethernet

The Green Ethernet features allow the switch to reduce power consumption on a per-port 
basis, except for the Combo ports (g15–16 for GS716T; g23–24 for GS724T). Each switch 
can support one or more of the following features:

Energy-detect Mode - When the Energy Detect mode is enabled and the port link is 

down, the PHY automatically goes down for short period of time and then wakes up to 
check link pulses. This mode reduces power consumption on the port when no link 
partner is present.

Short Cable Mode: With Short Cable mode enabled, the PHY goes into low power mode 

when the cable length is less than a certain limit.