Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

Interface Configuration

Use the DHCP Filtering Interface Configuration page to view and configure each port as a 
trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a 
port is configured as untrusted, any DHCP (or BootP) responses received on that port are 
discarded.

To access the DHCP Filtering Interface Configuration page, click System









 Interface Configuration. 

 

 

To configure DHCP filtering settings for an interface:

To configure DHCP filtering settings for a physical port, click PORTS.

To configure DHCP filtering settings for a Link Aggregation Group (LAG), click LAGS. 

To configure DHCP filtering settings for both physical ports and LAGs, click ALL.

Select the check box next to the port or LAG to configure. You can select multiple ports and 

LAGs to apply the same setting to the selected interfaces. Select the check box in the 

heading row to apply the same settings to all interfaces.

Choose the trust mode for the selected port(s) or LAG(s). 

Enable: Any DHCP responses received on this port are forwarded. The port 

connected downstream from the authorized DHCP server should be configured as a 
trusted port. Any DHCP responses received on a trusted port are forwarded. All other 
ports should be configured as untrusted. Any DHCP (or BootP) responses received 
are discarded.

Disable: Any DHCP (or BootP) responses received on this port are discarded. Ports 

connected to hosts should be configured as untrusted. This is the default value.

Click Apply to apply the change to the system. Configuration changes take effect 

immediately.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.