Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch Manual Do Equipamento

GS716Tv3/GS724Tv4 has 16/24 10/100/1000Mbps ethernet copper ports and 2 
dedicated 1000Mbps fiber ports. 

GS748Tv5 has 48 10/100/1000Mbps ethernet copper port, 2 Combo ports and 2 
dedicated 1000Mbps fiber ports.

The following SFP types are supported:

1000BASE-SX

1000BASE-LX

100BASE-FX (for combo ports on GS748T only)

The devices support full NETGEAR Smart Switch functionality.

The devices provide full compatibility with IEEE standards:

IEEE 802.3i, (10BASE-T)

IEEE 802.3u (100BASE-TX, 100BASE-FX)

IEEE 802.3x (Full-duplex flow control)

IEEE 802.3ab (1000BASE-T)

IEEE 802.3z (1000BASE-X)

Auto-sensing and auto-negotiating capabilities for all ports.

Auto Uplink™ on all ports to make the right connection.

Automatic address learning function to build the packet-forwarding information table. The 
table contains up to 16K Media Access Control (MAC) addresses.

Full-duplex and half-duplex functions for all 10/100/1000 Mbps ports.

Store-and-Forward transmission to remove bad packets from the network.

Full-duplex IEEE 802.3x pause frame flow control.

Active flow control to minimize packet loss/frame drops.

Half-duplex back-pressure control.

Per port LEDs, System LEDs.

Standard NETGEAR 7xx series chassis.

NETGEAR Green product series power-saving features:

Automatic power consumption adjustment based on the RJ-45 cable length.

Per port automatic power down when the port link is down.

Energy Efficient Ethernet (EEE), defined by IEEE 802.3az, supports operation in a Low 
Power Mode.