Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador
Maintenance
255
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
Dual Image Configuration
Use the Dual Image Configuration screen to select which image to load during the next boot
cycle, configure an image description, or delete an image.
cycle, configure an image description, or delete an image.
To change the image that loads during boot-up:
1.
Select Maintenance > File Management > Dual Image > Dual Image Configuration.
2.
From the Image Name list, select the image that is not the image shown in the
Current-active field.
Current-active field.
The Current-active field displays the name of the active image.
3.
(Optionally) In the Image Description field, specify a name for the selected image.
4.
Next to Activate Image, select the check box.
5.
Click the Apply button.
Note:
After activating an image, you must perform a system reset of the
switch to run the new code. The switch continues running the image
shown in the Current-active field until the switch reboots.
switch to run the new code. The switch continues running the image
shown in the Current-active field until the switch reboots.
To delete an image:
1.
From the Image Name list, select the image that is not the image shown in the
Current-active field.
Current-active field.
You cannot delete the active image.
2.
Next to Delete Image, select the check box.
3.
Click the Apply button.