Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador

To create a DiffServ Class/Policy and attach it to a switch interface, follow these steps:

From the QoS Class Configuration screen, create a new class with the following 
settings:

Class Name. Class1

Class Type. All

For more information about this step, see 

Click the Class1 hyperlink to view the DiffServ Class Configuration screen for this class.

Configure the following settings for Class1:

Protocol Type. UDP

Source IP Address. 192.12.1.0

Source Mask. 255.255.255.0

Source L4 Port. Other, and enter 4567 as the source port value 

Destination IP Address. 192.12.2.0

Destination Mask. 255.255.255.0

Destination L4 Port. Other, and enter 4568 as the destination port value

For more information about this step, see 

Click the Apply button.

From the Policy Configuration screen, create a new policy with the following settings:

Policy Selector. Policy1

Member Class. Class1

For more information about this step, see 

Click the Add button to add the new policy.

Click the Policy1 hyperlink to view the Policy Class Configuration screen for this policy.

Configure the Policy attributes as follows:

Assign Queue. 3

Policy Attribute. Simple Policy

Color Mode. Color Blind

Committed Rate. 1000000 Kbps

Committed Burst Size. 128 KB

Confirm Action. Send

Violate Action. Drop

For more information about this step, see