Netgear GS716Tv3 – ProSAFE 16-Port Gigabit Managed Switch Guia Do Administrador
Configure System Information
60
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
LLDP Configuration
Use the LLDP Configuration screen to specify the global LLDP and LLDP-MED parameters
that are applied to the switch.
that are applied to the switch.
To configure global LLDP settings:
1.
Select System > LLDP > Basic > LLDP Configuration.
2.
(Optionally). Configure non-default values for the following LLDP properties.
•
TLV Advertised Interval. The number of seconds between transmissions of LLDP
advertisements.
advertisements.
•
Hold Multiplier. The transmit interval multiplier value, where transmit hold multiplier ×
transmit interval = the time to live (TTL) value the device advertises to neighbors.
transmit interval = the time to live (TTL) value the device advertises to neighbors.
•
Reinitializing Delay. The number of seconds to wait before attempting to reinitialize
LLDP on a port after the LLDP operating mode on the port changes.
LLDP on a port after the LLDP operating mode on the port changes.
•
Transmit Delay. The minimum number of seconds to wait between transmissions of
remote data change notifications to one or more SNMP trap receivers configured on
the switch.
remote data change notifications to one or more SNMP trap receivers configured on
the switch.
3.
(Optionally) In the Fast Start Duration field, configure a non-default value.
This value sets the number of LLDP packets sent when the LLDP-MED fast start
mechanism is initialized, which occurs when a new endpoint device links with the
LLDP-MED network connectivity device.
mechanism is initialized, which occurs when a new endpoint device links with the
LLDP-MED network connectivity device.
4.
Click the Apply button.