Netgear FS752TS – ProSAFE 48 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports Guia Da Instalação
FS700TS Smart Switch Software Administration Manual
Monitoring the Switch
7-3
v1.0, September 2007
Log Filter
To configure log filters:
1. Click Monitoring > Logs > Log Filter. The Log Filter screen displays:
The Log Filter screen contains the following fields:
•
RAM Logs – Select the minimum message severity level to appear in the RAM Log.
The
following are the available message severity levels:
–
Emergency – The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
properly, an emergency log message is saved to the specified logging location.
–
Alert – The second highest warning level. An alert log is saved, if there is a serious
device malfunction; for example, all device features are down.
device malfunction; for example, all device features are down.
–
Critical – The third highest warning level. A critical log is saved if a critical device
malfunction occurs; for example, two device ports are not functioning, while the rest
of the device ports remain functional.
malfunction occurs; for example, two device ports are not functioning, while the rest
of the device ports remain functional.
–
Error – A device error has occurred; for example, if a single port is offline.
–
Warning – The lowest level of a device warning. The device is functioning, but an
operational problem has occurred.
operational problem has occurred.
–
Notice – Provides device information.
–
Informational – Provides device information.
–
Debug – Provides debugging messages.
•
Log File – Select the minimum message severity level to appear in the log file.
The
following are the available message severity levels:
–
Emergency – The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
properly, an emergency log message is saved to the specified logging location.
Figure 7-2