Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Equipamento
Hardware Overview
20
Managed Stackable Switch Series M4300
The following figure illustrates the back panel of model M4300-52G-POE+.
Figure 12. Back panel model M4300-52G-POE+
From left to right, the back panel of model M4300-52G-POE+ provides the following
components:
components:
•
One RJ-45 RS232 (115200, N, 8, 1) console port
•
One redundant power supply (RPS) interface
•
Fixed fans for front-to-back air flow
•
Modular bay in which an APS550W power supply unit (PSU) or APS1000W PSU is
installed, depending on the product ordered
installed, depending on the product ordered
•
Second modular bay for an optional second PSU
LEDs, M4300 Series 1G Models With 10G Uplinks
This section describes the LED designations of the 1G models with 10G uplinks.
Table 2. LEDs 1G models with 10G uplinks
LED
Designation
Stack ID
The Stack LED contains segments that can indicate the stack unit number of the
switch.
switch.
•
Solid green indicating a number. The switch is a member of a stack. The LED
displays the stack unit number.
displays the stack unit number.
•
Solid green indicating E. The switch functions in ECO mode with all port LEDs
turned off.
turned off.
•
Off. The switch is not a member of a stack.
Power 1 (for PSU 1)
and
Power 2 (for PSU 2)
and
Power 2 (for PSU 2)
•
Solid green . The power module is present, is supplying power to the switch,
and is functioning normally.
and is functioning normally.
•
Solid yellow . The switch is booting.
•
Blinking yellow. The system boot-up failed or another failure occurred.
•
Off . Power is not supplied to the switch.
PSU1 with AC connector
Bay for PSU2
RJ-45 RS232 console port
RPS interface