Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Equipamento
Hardware Overview
25
Managed Stackable Switch Series M4300
•
Modular bay in which an APS550W power supply unit (PSU) or APS1000W PSU is
installed, depending on the product ordered
installed, depending on the product ordered
LEDs, M4300X Series Full 10G Models with RJ45/SFP+ Combo
Ports
Ports
The following table describes the LEDs on the front panel of the full 10G models.
Table 3. LEDs full 10G models with RJ45/SFP+ Combo Ports
LED
Designation
Power
•
Solid green . The power module is present, is supplying power to the switch,
and is functioning normally.
and is functioning normally.
•
Solid yellow . The switch is booting.
•
Blinking yellow. The system boot-up failed or another failure occurred.
•
Off . Power is not supplied to the switch.
Note:
Because model M4300-48X can support two PSUs, the front panel provides
both a Power 1 LED and Power 2 LED.
Fan
•
Solid green . The fans are functioning normally.
•
Blinking yellow. One or more fans failed.
•
Off . Power is not supplied to the switch. The fans are off.
Stack Master
•
Solid green. The switch is functioning as a master in a stack.
•
Off. The switch is not a member of a stack or is functioning as a slave in a
stack.
stack.
Stack ID
The Stack LED contains segments that can indicate the stack unit number of the
switch.
switch.
•
Solid green indicating a number. The switch is a member of a stack. The LED
displays the stack unit number.
displays the stack unit number.
•
Solid green indicating E. The switch functions in ECO mode with all port LEDs
turned off.
turned off.
•
Off. The switch is not a member of a stack.
OOB Ethernet port
Left side speed LED:
•
Solid green. A valid 1000 Mbps link is established on the port.
•
Solid yellow. A valid 10/100 Mbps link is established on the port.
•
Off. No link is established on the port.
Right side activity/link LED:
•
Solid green. A valid link is established on the port.
•
Blinking green. The port is transmitting or receiving packets.
•
Off. No link is established on the port.
10GBASE-X SFP+ ports
(one LED per port)
•
Off . No SFP+ module link is established on the fiber port.
•
Solid green . The fiber port established a valid 10 Gbps link.
•
Blinking green . The fiber port is transmitting or receiving packets at 10 Gbps.
•
Solid yellow . The fiber port established a valid 1 Gbps link.
•
Blinking yellow . The fiber port is transmitting or receiving packets at 1 Gbps.