Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Equipamento

The switch provides one out-of-band 1G10BASE-T RJ-45 Ethernet port that lets you access 
the switch over its web management interface, Telnet, or SSH.

The switch provides one mini USB console port for console access only. The product 
package includes one USB console cable with one mini B connector and one type A 
connector. You can use this cable to connect the mini USB console port on the switch to a 
USB port on a VT100-compatible terminal or a Windows computer that runs VT100 terminal 
emulation software.

For you to be able to use the mini USB port and access the switch 
from a Windows computer that runs VT100 terminal emulation 
software, you must install the USB driver on the computer. The 
Windows USB driver is on the resource CD in the product package.

The switch provides one RJ-45 RS232 console port for console access only. This serial port 
is configured for 115200 baud, eight data bits, one stop bit, and no parity. The product 
package includes one console cable with one DB9 connector and one RJ-45 connector. You 
can use this cable to connect the RJ-45 RS23 console port on the switch to a DB9 port on a 
VT100-compatible terminal or a Windows computer that runs VT100 terminal emulation 
software.

The switch provides a Reset button on the front panel so that you can reboot the switch. 
Save the configuration before you press the Reset button.



Insert a device such as a straightened paper clip into the opening.

Press the recessed Reset button for about three seconds.

The switch reboots.

The redundant power supply (RPS) interface on model M4300-52G-POE+ provides a 
receptacle for an RPS cable such as the NETGEAR DC Connection Cable Model 
RPSC5412.