Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Equipamento
Installation
38
Managed Stackable Switch Series M4300
Install Two Half-Width Switches in a Rack
To install two half-width switches in a single rack space, you need the 19-inch rack-mount kit,
which includes inside and outside middle mounts, supplied with the switch.
which includes inside and outside middle mounts, supplied with the switch.
The figures in the following procedure show two M4300-12X12F switches. However, you can
install any two half-width models in the same manner. For example, you can also install two
M4300-8X8F switches or one model M4300-8X8F and one model M4300-12X12F in a single
rack space.
install any two half-width models in the same manner. For example, you can also install two
M4300-8X8F switches or one model M4300-8X8F and one model M4300-12X12F in a single
rack space.
To install two single half-width switches in a single rack space:
1.
On the switch that will be on the left side of the rack space, do the following:
a. On the right side of the switch, attach the inside middle mounts by inserting the
screws provided in the rack-mount kit through the mounts and into the mounting holes
in the switch.
in the switch.
b. Tighten the screws with a No. 2 Phillips screwdriver to secure each middle mount to the
right side of the switch.
2.
On the switch that will be on the right side of the rack space, do the following:
a. On the left side of the switch, attach the outside middle mounts by inserting the
screws provided in the rack-mount kit through the mount and into the mounting holes
in the switch.
in the switch.
b. Tighten the screws with a No. 2 Phillips screwdriver to secure each middle mount to the
left side of the switch.