Netgear M4100-24G-POE+ (GSM7224P) - ProSAFE Gigabit L2+ Managed Switch Guia Do Programa
Switching Commands
211
M4100 Series ProSAFE
Managed
Switches
MAC Database Commands
This section describes the commands you use to configure and view information about the
MAC databases.
MAC databases.
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The
<seconds>
<seconds>
parameter must be within the range of 10 to 1,000,000 seconds.
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
SMACDMAC
Mode
Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag Mode
May be enabled or disabled. The factory default is disabled.
TCP FIN&URG&
PSH Mode
PSH Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag &
Sequence Mode
Sequence Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN & FIN
Mode
Mode
May be enabled or disabled. The factory default is disabled.
TCP Fragment
Mode
Mode
May be enabled or disabled. The factory default is disabled.
TCP Offset Mode May be enabled or disabled. The factory default is disabled.
Default
300
Format
bridge aging-time <seconds>
Mode
Global Config
Format
no bridge aging-time
Mode
Global Config
Term
Definition