Netgear M4100-24G-POE+ (GSM7224P) - ProSAFE Gigabit L2+ Managed Switch Guia Do Programa
Switching Commands
63
M4100 Series ProSAFE
Managed
Switches
Command example:
(NETGEAR Switch) #show interfaces switchport general
Intf
PVID
Ingress
Acceptable
Untagged
Tagged
Forbidden Dynamic
Filtering
Frame
Type
Vlans
Vlans
Vlans
Vlans
--------- ----- ---------- ----------- --------- --------- --------- ---------
1/0/1
1
Enabled
Admit All
1,4-7
30-40,55
3,100-200
88,96
1/0/2
1
Disabled
Admit All
1
30-40,55
none
none
Double VLAN Commands
This section describes the commands you use to configure double VLAN (DVLAN). Double
VLAN tagging is a way to pass VLAN traffic from one customer domain to another through a
Metro Core in a simple and cost effective manner. The additional tag on the traffic helps
differentiate between customers in the MAN while preserving the VLAN identification of the
individual customers when they enter their own 802.1Q domain.
VLAN tagging is a way to pass VLAN traffic from one customer domain to another through a
Metro Core in a simple and cost effective manner. The additional tag on the traffic helps
differentiate between customers in the MAN while preserving the VLAN identification of the
individual customers when they enter their own 802.1Q domain.
dvlan-tunnel ethertype
This command configures the ether-type for all interfaces. The ether-type may have the
values of 802.1Q, vman, or custom. If the ether-type has a value of custom, the optional
value of the custom ether type must be set to a value from 0 to 65535.
values of 802.1Q, vman, or custom. If the ether-type has a value of custom, the optional
value of the custom ether type must be set to a value from 0 to 65535.
mode dot1q-tunnel
This command is used to enable Double VLAN Tunneling on the specified interface.
no mode dot1q-tunnel
This command is used to disable Double VLAN Tunneling on the specified interface. By
default, Double VLAN Tunneling is disabled.
default, Double VLAN Tunneling is disabled.
Default
vman
Format
dvlan-tunnel ethertype {802.1Q | vman | custom} [<0-65535>]
Mode
Global Config
Default
disabled
Format
mode dot1q-tunnel
Mode
Interface Config
Format
no mode dot1q-tunnel
Mode
Interface Config