Netgear M4100-D10-POE (FSM5210Pv1h1) - 8‐port FE + 2 GE Combo L2 Managed PoE Switch Guia Do Programa

DiffServ

diffserv.c 165: diffServRestore Failed to 
reset DiffServ. Recommend resetting 
device

While attempting to clear the running 
configuration an error was encountered in 
removing the current settings. This might 
lead to an inconsistent state in the system 
and resetting is advised.

DiffServ

Policy invalid for service intf: "policy name, 
intIfNum x, direction y

The DiffServ policy definition is not 
compatible with the capabilities of the 
interface specified. Check the platform 
release notes for information about 
configuration limitations.

DHCP relay

REQUEST hops field more than config 
value

The DHCP relay agent has processed a 
DHCP request whose HOPS field is larger 
than the maximum value allowed. The relay 
agent will not forward a message with a 
hop count greater than 4. 

DHCP relay

Request's seconds field less than the 
config value

The DHCP relay agent has processed a 
DHCP request whose SECS field is larger 
than the configured minimum wait time 
allowed.

DHCP relay

processDhcpPacket: invalid DHCP packet 
type: %u\n

The DHCP relay agent has processed an 
invalid DHCP packet. Such packets are 
discarded by the relay agent.

OSPFv2

Best route client deregistration failed for 
OSPF Redist

OSPFv2 registers with the IPv4 routing 
table manager (“RTO”) to be notified of best 
route changes. There are cases where 
OSPFv2 deregisters more than once, 
causing the second deregistration to fail. 
The failure is harmless.

OSPFv2

XX_Call() failure in _checkTimers for 
thread 0x869bcc0

An OSPFv2 timer has fired but the 

message queue that holds the event has 
filled up. This is normally a fatal error.