Netgear M4100-D10-POE (FSM5210Pv1h1) - 8‐port FE + 2 GE Combo L2 Managed PoE Switch Guia Do Programa
Using the Command-Line Interface
8
M4100 Series ProSAFE
Managed
Switches
Command Syntax
A command is one or more words that might be followed by one or more parameters.
Parameters can be required or optional values.
Some commands, such as show network and clear vlan, do not require parameters.
Other commands, such as network parms, require that you supply a value after the
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the network parms
command syntax:
Other commands, such as network parms, require that you supply a value after the
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the network parms
command syntax:
•
network parms
is the command name.
•
<ipaddr>
and <netmask> are parameters and represent required values that you must
enter after you type the command keywords.
•
[gateway]
is an optional keyword, so you are not required to enter a value in place of
the keyword.
This command line reference manual lists each command by the command name and
provides a brief description of the command. Each command reference also contains the
following information:
provides a brief description of the command. Each command reference also contains the
following information:
•
Format shows the command keywords and the required and optional parameters.
•
Mode identifies the command mode you must be in to access the command.
•
Default shows the default value, if any, of a configurable setting on the device.
The show commands also contain a description of the information that the command shows.
Command Conventions
In this document, the command name is in bold font. Parameters are in <italic font>
between angle brackets. You must replace the parameter name with an appropriate value,
which might be a name or number. Parameters are order-dependent. Keyword choices are in
bold
between angle brackets. You must replace the parameter name with an appropriate value,
which might be a name or number. Parameters are order-dependent. Keyword choices are in
bold
font.
The parameters for a command might include mandatory values, optional values, or keyword
choices. The following table describes the conventions this document uses to distinguish
between value types.
choices. The following table describes the conventions this document uses to distinguish
between value types.
Format
network parms <ipaddr> <netmask> [gateway]
Table 1. Parameter Conventions
Symbol
Example
Description
italic font in
angle brackets
<value> or [<value>]
Indicates a variable value. You must replace the
italicized text within angle brackets with a name or
number.
italicized text within angle brackets with a name or
number.
[ ] square brackets
[keyword]
Indicates an optional parameter.