Netgear M4100-D10-POE (FSM5210Pv1h1) - 8‐port FE + 2 GE Combo L2 Managed PoE Switch Manual Do Utilizador
Manage Device Security
276
M4100 Series Managed Switch
8.
If you are creating a new login list, complete the List Name field.
The list name can be up to 15 alphanumeric characters long and is not case-sensitive.
9.
For each of the lists, select the methods in the order they will appear in the authentication
login list.
login list.
If you select a method that does not time out as the first method, such as 'local', no other
method is tried, even if you specified more than one method. The options are as follows:
method is tried, even if you specified more than one method. The options are as follows:
-
Enable- The privileged EXEC password is used for authentication.
-
Line- The line password is used for authentication.
-
Local- The user's locally stored ID and password is used for authentication
-
None- The user cannot be authenticated.
-
Radius- The user's ID and password are authenticated using the RADIUS server
instead of local server.
instead of local server.
-
Tacacs- The user's ID and password are authenticated using the TACACS server.
If the first method times out, the next method is selected.
10.
To add a new login list to the switch, click the ADD button.
11.
To remove the selected authentication login list from the configuration, click the DELETE
button.
button.
You can use this button only if you are logged in as admin (with Read/Write access).
12.
Click the APPLY button.
Your settings are saved.
Enable an Authentication List
You can configure enable lists. A enable list specifies the authentication method(s) you use to
validate privileged EXEC access for the users associated with the list. The preconfigured
users, admin and guest, are assigned to a preconfigured list named defaultList, which you
cannot delete. All newly created users are also assigned to the defaultList until you
specifically assign them to a different list
validate privileged EXEC access for the users associated with the list. The preconfigured
users, admin and guest, are assigned to a preconfigured list named defaultList, which you
cannot delete. All newly created users are also assigned to the defaultList until you
specifically assign them to a different list
Two default lists are present: enableList and enableNetList.
To configure the enable authentication list:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.