Netgear M4100-D10-POE (FSM5210Pv1h1) - 8‐port FE + 2 GE Combo L2 Managed PoE Switch Guia Do Administrador
Syslog
288
ProSAFE M4100 Managed Switches
Configure Logging for a Port
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure Logging for the Port
(Netgear Switch Routing) #config
(Netgear Switch Routing) (Config)#logging ?
buffered
Buffered (In-Memory) Logging Configuration.
cli-command
CLI Command Logging Configuration.
console
Console Logging Configuration.
host
Enter IP Address for Logging Host
syslog Syslog Configuration.
(Netgear Switch Routing) (Config)#logging host ?
<hostaddress>
Enter Logging Host IP Address
reconfigure
Logging Host Reconfiguration
remove
Logging Host Removal
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 ?
<cr> Press Enter to execute the command.
<port>
Enter Port Id
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?
<cr> Press Enter to execute the command.
<severitylevel>
Enter Logging Severity Level (emergency|0, alert|1, critical|2,
error|3, warning|4, notice|5, info|6, debug|7).
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?
<cr> Press Enter to execute the command.
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1
(Netgear Switch Routing) #show logging hosts
Index IP Address Severity Port Status
----- ----------------- ---------- ---- -------------
1 192.168.21.253 alert 4 Active