Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless Manual Do Equipamento
14
NETGEAR EDA 500
This chapter provides an overview of the physical features of the EDA 500 and includes the following sections:
•
on page 110
•
on page 110
•
on page 111
•
on page 112
•
on page 113
The EDA 500 disk trays are slightly different from the standard trays. Use only EDA 500 disk
trays with the EDA 500. For more information about the EDA 500 disk trays, see
trays with the EDA 500. For more information about the EDA 500 disk trays, see
on page 117.
Note
A ReadyNAS cannot boot using the disks in an EDA 500. All disks in a RAID volume must be either in a ReadyNAS
or in an EDA 500. A RAID volume cannot combine disks in a ReadyNAS with disks in an EDA 500.
or in an EDA 500. A RAID volume cannot combine disks in a ReadyNAS with disks in an EDA 500.
You can add an EDA 500 to a ReadyNAS while the ReadyNAS is running, but you cannot remove the EDA
while the ReadyNAS is running.
while the ReadyNAS is running.
You can add and remove disks while an EDA 500 is in operation (hot swap). If an added disk has data on it, the
data shows as an inactive volume. You need to destroy inactive volumes, which destroys all data in the volume,
and create new volumes, before the space is available for use by the ReadyNAS.
data shows as an inactive volume. You need to destroy inactive volumes, which destroys all data in the volume,
and create new volumes, before the space is available for use by the ReadyNAS.
109