Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless Manual Do Equipamento
Table 11. Indicator descriptions ReadyNAS 526X and 626X (Continued)
Description
Indicator
Two LED status indicators are built into each 1G Ethernet port. One LED is a bicolor
LED that can light solid amber or solid green and that indicates the port speed. The
other LED is green and indicates the link (solid green) and activity (blinking green).
These LEDs indicate port speed and activity as follows:
LED that can light solid amber or solid green and that indicates the port speed. The
other LED is green and indicates the link (solid green) and activity (blinking green).
These LEDs indicate port speed and activity as follows:
•
Bicolor LED green, green LED solid. 1 Gbps connection speed, no activity.
•
Bicolor LED green, green LED blinking. 1 Gbps connection speed, activity.
•
Bicolor LED amber, green LED solid. 100 Mbps connection speed, no activity.
•
Bicolor LED amber, green LED blinking. 100 Mbps connection speed, activity.
•
Bicolor LED off, green LED off. No connection.
Model RN626X only:
Rear panel 1G Ethernet LAN
port LEDs
port LEDs
Two LED status indicators are built into each 10G Ethernet port. One LED is a bicolor
LED that can light solid amber or solid green and that indicates the port speed. The
other LED is green and indicates the link (solid green) and activity (blinking green).
These LEDs indicate port speed and activity as follows:
LED that can light solid amber or solid green and that indicates the port speed. The
other LED is green and indicates the link (solid green) and activity (blinking green).
These LEDs indicate port speed and activity as follows:
•
Bicolor LED green, green LED solid. 1 Gbps connection speed, no activity.
•
Bicolor LED green, green LED blinking. 1 Gbps connection speed, activity.
•
Bicolor LED amber, green LED solid. 10 Gbps connection speed, no activity.
•
Bicolor LED amber, green LED blinking. 10 Gbps connection speed, activity.
•
Bicolor LED off, green LED off. No connection.
Rear panel 10G Ethernet
LAN port LEDs
LAN port LEDs
Power On and Shut Down
This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.
one of the preferred shutdown methods whenever possible.
Power On
When the system is connected to a power supply and the Power switch is in the On position, the system
automatically powers on.
automatically powers on.
You can also power on the system by pressing the Power button on the front panel of the system.
Preferred Shutdown
You can gracefully shut down your system by using the Power button or the ReadyNAS local admin page.
For information about how to gracefully shut down your system using the ReadyNAS local admin page, see
the ReadyNAS OS 6 Software Manual, which is available at
the ReadyNAS OS 6 Software Manual, which is available at
NETGEAR ReadyNAS 526X and 626X
98
ReadyNAS OS 6.5