Netgear EDA500 – ReadyNAS Expansion Chassis 5-Bay, Diskless Guia Do Programa
Your settings are saved.
10.
Configure the switch or router to which the ReadyNAS is attached to support the bonded adapter.
Change the Teaming Mode
To change the teaming mode of a bonded adapter:
1.
Log in to your ReadyNAS.
2.
Select Network > Bonds.
The page updates showing the bonded interfaces.
The page updates showing the bonded interfaces.
3.
Click the gear icon for the bonded adapter.
4.
Click the Settings button in the pop-up menu.
The bond settings pop-up window opens.
The bond settings pop-up window opens.
5.
Click the Mode tab.
6.
In the Teaming Mode menu, select a teaming mode.
For more information about teaming modes, see
For more information about teaming modes, see
on page 165.
7.
(For IEEE 802.3ad LACP and XOR only) Select the radio button next to the hash type option that you want to
use.
For more information about hash types, see
use.
For more information about hash types, see
on page 165.
8.
(For Active Backup only) From the Primary Device menu, select the Ethernet interface that is active by default.
Other Ethernet interfaces in the bond become active if and only if the active interface fails.
Other Ethernet interfaces in the bond become active if and only if the active interface fails.
9.
Click the Apply button.
Your settings are saved.
Your settings are saved.
Delete a Bonded Adapter
To delete a bonded adapter and reestablish separate Ethernet links:
1.
Log in to your ReadyNAS.
2.
Select Network > Bonds.
The page updates showing the bonded interfaces.
The page updates showing the bonded interfaces.
3.
Click the gear icon for the bonded adapter.
4.
Click the Delete button in the pop-up menu.
5.
Confirm the deletion.
System Settings
169
ReadyNAS OS 6.4