Netgear AC815S – AT&T Unite Explore™ Manual Do Utilizador
Get Started
9
AirCard 815S Mobile Hotspot
Status LED
The status LED indicates data connection status:
•
Blue, slow blink. The mobile hotspot is ready.
•
Blue, double-blink. The mobile hotspot is transferring data.
•
Amber, slow blink. The mobile hotspot is not connected to the network.
Dust and Water Resistance
The mobile hotspot’s rugged design is dustproof, shock resistant, and water resistant (IP65
and MIL-STD-810G drop & shock) when both RF doors are closed and the back cover is
tightly shut.
and MIL-STD-810G drop & shock) when both RF doors are closed and the back cover is
tightly shut.
1
The mobile hotspot is not submersible but will resist a hard stream of water for
up to 30 seconds (each side).
Set Up Your Mobile Hotspot
The mobile hotspot comes with a preinstalled SIM card.
To set up your mobile hotspot:
1.
Remove the back cover.
2.
Insert the battery.
Gold pins
1. Meets US MIL-STD-810G for shock resistance. Certified IP65 for protection against dust and water jets. Device will not operate under water and
should be dried as quickly as possible when wet. Shock-resistant when dropped from ≤ 4 feet onto flat surface. Device may not perform as shown in
all extreme conditions.