Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador

Select the drive letter to map to the new network folder.

Click the Finish button.

The USB storage device is mapped to the drive letter that you specified.

To connect to the USB storage device as a different user, select the Connect using different credentials
check box, click the Finish button, and do the following:

Type the user name and password.

Click the OK button.

The USB storage device is mapped to the drive letter that you specified.

From a computer or device on the network, you can access a storage device that is connected to the modem
router.

Connect a USB or eSATA storage device to the appropriate port on the modem router.

If your storage device uses a power supply, you must use it when you connect the device to the modem
router.

When you connect the storage device to the modem router’s port, it might take up to two minutes before
it is ready for sharing. By default, the device is available to all computers on your local area network
(LAN).

On a Mac that is connected to the network, select Go > Connect to Server.

In the Server Address field, enter smb://readyshare.

When prompted, select the Guest radio button.

If you set up access control on the modem router and you allowed your Mac to access the network,
select the Registered User radio button and enter admin for the name and password for the password.
For more information about access control, see 

 on page 99.

Click the Connect button.

A window automatically opens and displays the files and folders on the device.

Your router comes with free backup software for all the Windows computers in your home. Connect a USB
hard disk drive (HDD) to the modem router for centralized, continuous, and automatic backup.

The following operating systems support ReadySHARE Vault:

Windows XP SP3

Windows 7