Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.

The Port Forwarding/Port Triggering page displays.

Leave the Port Forwarding radio button selected.

In the table, select the radio button next to the service name.

Click the Delete Service button.

The service is deleted.

If you host a web server on your local network, you can use port forwarding to allow web requests from
anyone on the Internet to reach your web server.

Assign your web server either a fixed IP address or a dynamic IP address using DHCP address
reservation.

In this example, your router always gives your web server an IP address of 192.168.1.33.

On the Port Forwarding/Port Triggering page, configure the router to forward the HTTP service to the
local address of your web server at 192.168.1.33.

HTTP (port 80) is the standard protocol for web servers.

(Optional) Register a host name with a Dynamic DNS service and specify that name on the Dynamic
DNS page of the router.

Dynamic DNS makes it much easier to access a server from the Internet because you can type the
name in the Internet browser. Otherwise, you must know the IP address that the ISP assigned, which
typically changes.

The following sequence shows the effects of a port forwarding rule:

When you type the URL www.example.com in your browser, the browser sends a web page request
message with the following destination information:

Destination address. The IP address of www.example.com, which is the address of your router.

Destination port number. 80, which is the standard port number for a web server process.

Your modem router receives the message and finds your port forwarding rule for incoming port 80 traffic.

The modem router changes the destination in the message to IP address 192.168.1.123 and sends the
message to that computer.