Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador

From the Internet Connection Type menu, select 6to4 Tunnel.

The modem router automatically detects the information in the Router’s IPv6 Address on LAN field. This
field shows the IPv6 address that is acquired for the modem router’s LAN interface. The number after
the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address.
If no address is acquired, the field displays Not Available.

Select a Remote 6to4 Relay Router radio button:

Auto. Your modem router uses any remote relay modem router that is available on the Internet. This
is the default setting.

Static IP Address. Enter the static IPv4 address of the remote relay modem router. Your IPv6 ISP
usually provides this address.

Select an IP Address Assignment radio button:

Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems
might not support the DHCPv6 client function.

Auto Config. This is the default setting.

This setting specifies how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN).

(Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the
IPv6 address of the modem router’s LAN interface.

If you do not specify an ID here, the modem router generates one automatically from its MAC address.

Click the Apply button.

Your settings are saved.

In pass-through mode, the modem router works as a Layer 2 Ethernet switch with two ports (LAN and WAN
Ethernet ports) for IPv6 packets. The modem router does not process any IPv6 header packets.