Netgear R7100LG - Nighthawk 4G LTE Modem Router Manual Do Utilizador

You can use access control to block or allow access to your network.

Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Security > Access Control.

Select the Turn on Access Control check box.

You must select this check box before you can specify an access rule and use the Allow and Block
buttons. When this check box is cleared, all devices are allowed to connect, even if a device is in the
blocked list.

Select an access rule:

Allow all new devices to connect. With this setting, if you add a new device, it can access your
network. You don’t need to enter its MAC address on this page. We recommend that you leave this
radio button selected.

Block all new devices from connecting. With this setting, if you add a new device, before it can
access your network, you must enter its MAC address for an Ethernet connection and its MAC
address for a WiFi connection in the allowed list.

The access rule does not affect previously blocked or allowed devices. It applies only to devices joining
your network in the future after you apply these settings.

To view allowed or blocked devices that are not connected, click one of the following links:

The list displays.