Netgear RDD1 – ReadyDATA 516 Disk Packs RDD1LT02, RDD1LT03, RDD1LT04, RDD1SM01 Guia Do Programa

These documents are available at 

. Connect the ReadyDATA 

to a DHCP server.

2.  Use RAIDar to Discover the ReadyDATA 

13. Use RAIDar to locate the ReadyDATA 

on the network.

3.  Create a Volume and Select the RAID Level 

26. Assign the disks to volumes and 

select the RAID level for each volume. Without at least one volume, changes are not 
saved after you reload the ReadyDATA. Make sure that you create a volume before you 
configure any other settings.

4.  Chapter 3, Configure the System Settings

. Configure the basic system components, network 

settings, and global file-sharing protocols.

5.  Create a Share 

107. Create shares (NAS data sets) 

for data transfer and storage over SMB, NFS, AFP, and FTP. Create LUNs (SAN data 
sets) for data transfer and storage over iSCSI.

6.  Create a User Account 

have access to the ReadyDATA, or connect to an external Active Directory.

7.  Set Up Access Rights to Shares 

90 and 

121. Set the access right for the shares and LUNs.

8.  Manage Snapshots for Shares and LUNs 

shares and LUNs by creating snapshots.