Netgear C7000 – Nighthawk AC1900 WiFi Cable Modem Router Manual Do Utilizador
Specify Internet Port Settings
99
Nighthawk AC1900
WiFi Cable
Modem
Router
Add a Port Triggering Service
To add a port triggering service:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
5.
Select the Port Triggering radio button.
6.
Click the Add Service button.
7.
In the Service Name field, type a descriptive service name.
8.
In the Service User list, select Any, or select Single address and enter the IP address of
one computer:
one computer:
•
Any (the default) allows any computer on the Internet to use this service.
•
Single address restricts the service to a particular computer.
9.
Select the service type, either TCP or UDP or TCP/UDP (both).
If you are not sure, select TCP/UDP.
10.
In the Triggering Port field, enter the number of the outbound traffic port that will open the
inbound ports.
inbound ports.
11.
Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
Ending Port fields.
12.
Click the Apply button.