Netgear WNR614 - 5PT N300 Wireless Router Guia Da Instalação

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered 

trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. 

Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. 

NETGEAR, Inc.
350 East Plumeria Drive,

San Jose, CA 95134 USA

This router has a unique WiFi network name (SSID) and network key 
(password). The default SSID and password are uniquely generated for 
every device (like a serial number) to protect and maximize your WiFi 
security. This information is located on the product label. 

NETGEAR recommends that you do not change the preset SSID or 
password. If you do change the settings, the information on the product 
label does not apply.

Find the preset WiFi settings on your router and record them here:

 WiFi network name (SSID) _______________________________
 Network key (password) _________________________________

If you change the preset WiFi settings, record them here:

 WiFi network name (SSID) _______________________________

 Network key (password) _________________________________

If necessary to retrieve or update your password, enter
www.routerlogin.net

 

in the address field of the web browser. When 

prompted, enter admin for the user name and password for the 
password.

Select Wireless Settings to locate your WiFi password.

To connect your computer or WiFi device (such as a smart phone or 
gaming device) to your router’s WiFi network, you can use either the 
manual method or Wi-Fi Protected Setup (WPS) method.

Open the software utility that manages your WiFi connections on the 

computer or WiFi device that you want to connect to your router. 
This utility scans for all WiFi networks in your area. 

Find and select the router’s WiFi network name (SSID).
The SSID is on the product label.

Enter the router’s password (or your custom password if you changed 

it) and click the Connect button.
The password is on the product label.

Repeat Step 1 through Step 3 to add other computers or WiFi 

devices.

If your computer or WiFi device supports WPS, you can use WPS to join 
the router’s WiFi network. For help with the WPS button on the computer 
or WiFi device, check the instructions or online help that came with that 
computer or WiFi device. Some older equipment cannot use WPS.

WPS does not support WEP security. If you are using WEP security, 

use the manual method.

Press and hold the WPS/Reset button on the back of the router with 

the end of a paper clip or a similar object for one to three seconds.
The WiFi LED

blinks. 

Within two minutes, press the WPS button on the computer or WiFi 

device.
The computer or WiFi device connects to the router’s WiFi network. 

You can return the router to its factory settings. Use the end of a paper clip 
or a similar object to press and hold the WPS/Reset button on the back of 
the router for at least four seconds. The Power LED

blinks. The router 

resets and returns to the factory settings.

Thank you for purchasing this NETGEAR product.

After installing your device, locate the serial number on the label of your 

You must register your product before you can use NETGEAR telephone 
support. NETGEAR recommends registering your product through the 
NETGEAR website. For product updates and web support, visit 

NETGEAR recommends that you use only the official NETGEAR support 
resources. 

You can get the user manual online at 

or through a link in the product’s user interface.

For the current EU Declaration of Conformity, visit 

For regulatory compliance information, visit 

. 

See the regulatory compliance document before connecting the power 
supply.