Netgear PL1200 - Powerline 1200 Ficha De Dados

Página de 2
This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller.
24/7 basic technical phone support provided for 90 days from purchase date.
Requires use of HomePlug AV compatible Powerline device (two PL1200 devices included). For a complete list of HomePlug AV certified devices,  
please check www.homeplug.org/certified_products.
† 
Actual data throughput and data over distance will vary. Network conditions and environmental factors, including volume of network traffic, building material and construction,  
and network overhead, result in lower actual data throughput rate.
  Outlets must be electrically connected in order for Powerline devices to provide a network connection between them.
Intended for indoor use only in EU member states, EFTA states, and Switzerland.
NETGEAR, and the NETGEAR Logo are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Other  
brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice.  
© 2015 NETGEAR, Inc. All rights reserved.
NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888-NETGEAR (638-4327), E-mail: info@NETGEAR.com, www.NETGEAR.com 
D-PL1200-0
Powerline 
1200 
           
 
 
 
 
Data Sheet
PL1200
PAGE 2 OF 2
Package Contents
• Two (2) Powerline 1200 Adapters (PL1200)
• Two (2) 2 m (6.5 ft) Ethernet cables
• Quick start guide
Warranty
• For warranty details visit  
System Requirements
• To connect via Ethernet: RJ-45 Ethernet port
• Existing electrical wiring and outlets
Specifications
• Dimensions: 100 x 56 x 30 mm (4.5 x 2.2 x 1.18 in)
• Weight: 112.5 g (0.25 lb)
• Power consumption: Standby 0.471W, on-state 
2.44W, full power 3.47W 
• 1200Mbps
 Powerline interface
• 10/100/1000Mbps
 Gigabit Ethernet port
• Typical coverage up to 500m
2
 (5,832ft
2
)
• HomePlug® AV2
1
 compliant
• Works with HomePlug AV and HomePlug Green PHY
• IEEE® 802.3 compliant
Connection Diagram
Pick-a-Plug LED
Connects to
Ethernet port
Push-and-Secure
button