Netgear DM200 – Broadband High-Speed DSL Modem Manual Do Utilizador
Recover the admin Password
If you used the NETGEAR installation assistant to set up the modem, you had to enable password recovery.
(For information about setting up password recovery, see
(For information about setting up password recovery, see
The following procedure works only if you did set up password recovery. The recovery process is supported
in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser.
in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser.
To recover your password:
1.
Launch a web browser from a computer that is connected to the network.
2.
Enter www.routerlogin.net.
A login window opens.
3.
Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the modem. The serial
number is on the product label of the modem.
number is on the product label of the modem.
4.
Enter the serial number of the modem.
5.
Click the Continue button.
A page displays requesting the answers to your security questions.
6.
Enter the saved answers to your security questions.
7.
Click the Continue button.
A page displays your recovered password.
8.
Click the Login again button.
A login window opens.
9.
With your recovered password, log in to the modem.
Return the Modem to Its Factory Default Settings
Under some circumstances (for example, if you lost track of the changes that you made to the modem
settings or you move the modem to a different network), you might want to erase the configuration and reset
the modem to factory default settings.
settings or you move the modem to a different network), you might want to erase the configuration and reset
the modem to factory default settings.
If you do not know the current IP address of the modem, first try to use an IP scanner application to detect
the IP address before you reset the modem to factory default settings.
the IP address before you reset the modem to factory default settings.
To reset the modem to factory default settings, you can use either the Reset button on the back of the
modem or the Erase function. However, if you cannot find the IP address or lost the password to access
the modem, you must use the Reset button.
modem or the Erase function. However, if you cannot find the IP address or lost the password to access
the modem, you must use the Reset button.
After you reset the modem to factory default settings, the user name is admin, the password is password,
the LAN IP address is 192.168.5.1 (which is the same as www.routerlogin.net), the DHCP server is enabled,
and the device mode is Router (Modem + Router). For a list of factory default settings, see
the LAN IP address is 192.168.5.1 (which is the same as www.routerlogin.net), the DHCP server is enabled,
and the device mode is Router (Modem + Router). For a list of factory default settings, see
on page 105.
Manage the Modem and Monitor the Traffic
76
Broadband High-Speed DSL Modem Model DM200