Netgear DGN2000 – Wireless-N Router with Built-in DSL Modem Guia Da Instalação
40
Technical Specifications
Default Configuration
You can use the Wireless On/Off and WPS buttons that are located on the side of your router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Wireless On/Off and WPS buttons simultaneously for 6 seconds. Your router will
return to the factory configuration settings that are shown in the table below.
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Wireless On/Off and WPS buttons simultaneously for 6 seconds. Your router will
return to the factory configuration settings that are shown in the table below.
Interface Specifications
LAN:
10BASE-T or 100BASE-Tx, RJ-45
WAN:
ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
T1.413, G.DMT, G.Lite
Feature
Default Behavior
Router Login
User Login URL
http://www.routerlogin.net or http://www.routerlogin.com
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Internet Connection
WAN MAC Address
Use Default address
WAN MTU Size
1500
Port Speed
AutoSense
Local Network (LAN)
Lan IP
192.168.0.1
Subnet Mask
255.255.255.0
RIP Direction
None
RIP Version
Disabled
RIP Authentication
None
DHCP Server
Enabled
DHCP Starting IP Address
192.168.0.2
DHCP Ending IP Address
192.168.0.254
DMZ Disabled
Time Zone
GMT