Netgear DG834v1 – ADSL Modem Router Manual De Referência

3-16

Connecting the Router to the Internet

We recommend that you start the manual configuration from the Setup Wizard:

1.

Select your country and language. Language choices are English, French, German, and Italian. 
After you change the language, the remaining setup screens change to the language of your 
choice.

2.

Select No to manually configure your router connection.

3.

Click Next.

4.

Manually configure the router in the Basic Settings menu shown in 

5.

Follow the instructions below according to the encapsulation method and whether your 
Internet connection requires a login. The following methods are available:

•

Internet Connection Requires Login and Uses PPPoE

•

Internet Connection Requires Login and Uses PPPoA

•

Internet Connection Does Not Require a Login

6.

Usually the default ADSL Settings work fine for most ISPs and you can skip this step. If you 
have any problems with your connection, check the ADSL Settings. See 

 for more details.

1.

If your Internet connection does require login, select Yes and fill in the settings according to 
the instructions below.

Note: You will no longer need to launch the ISP’s login program on your computer in order to 
access the Internet. When you start an Internet application, your router automatically logs you 
in.

2.

Choose PPPoe for the encapsulation method your ISP uses.

3.

Enter the login name (frequently the email address your ISP provided), password, and service 
name (if required).

4.

If you want to change the login timeout, enter a new value in minutes. This determines how 
long the router keeps the Internet connection active after there is no Internet activity from the 
LAN. Entering an Idle Timeout value of zero means never log out.

5.

When a connection uses PPPoE, the IP address is normally assigned automatically. However, 
the DG834 allows this address to be set manually.