Netgear DG834Gv2 – 54 Mbps Wireless ADSL Firewall Modem Manual De Referência

3-14

Connecting the Router to the Internet

5.

Click Apply to save the settings.

6.

Click the Test button to test your Internet connection. If the NETGEAR Web site does not 
appear within one minute, refer to 

After completing the Internet connection configuration, your can test your Internet connection. 
Log in to the router, then, from the Basic Settings link in the Setup menu, click the Test button. If 
the NETGEAR Web site does not appear within one minute, refer to 

Your router is now configured to provide Internet access for your network. Your router 
automatically connects to the Internet when one of your computers requires access. It is not 
necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect, 
log in, or disconnect. These functions are performed by the router as needed.

To access the Internet from any computer connected to your router, launch a browser such as 
Microsoft Internet Explorer or Netscape Navigator. You should see the router’s Internet LED 
blink, indicating communication to the ISP. The browser should begin to display a Web page.

The following chapters describe how to configure the Advanced features of your router, and how 
to troubleshoot problems that may occur.

You can manually configure your router using the menu below, or you can allow the Setup Wizard 
to determine your configuration as described in the previous section.