Netgear DG834Gv2 – 54 Mbps Wireless ADSL Firewall Modem Manual De Referência
Reference Manual for the Model Wireless ADSL Firewall Router DG834G
4-14
Wireless Configuration
8.
Click Apply to save your settings.
How to Configure WPA-PSK
Note: Not all wireless adapters support WPA. Furthermore, client software is required on the
client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
To configure WPA-PSK, follow these steps:
1.
Log in at the default LAN address of
, with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
set up.
2.
Click Wireless Settings in the Setup section of the main menu of the DG834G.
3.
Choose the WPA-PSK radio button. The WPA-PSK menu will open.
4.
Enter the pre-shared key in the Passphrase field.
5.
Click Apply to save your settings.
Note:
When configuring the router from a wireless computer, if you configure WEP
settings, you will lose your wireless connection when you click Apply. You must then
either configure your wireless adapter to match the router WEP settings or access the
router from a wired computer to make any further changes.
either configure your wireless adapter to match the router WEP settings or access the
router from a wired computer to make any further changes.