Netgear D6220 – WiFi VDSL2/ADSL2+ Modem Router Guia Da Instalação

Quick Start

Model D6220

Connect the power adapter to the modem router and press the 

Power button.

The Power LED

lights amber and then turns green when the modem router 

is ready. If the modem router is connected to a DSL service, the DSL LED 
lights green.
Position the antennas as shown. Later you can adjust them as needed for better 
reception.

You can either use an Ethernet cable or connect with WiFi to the modem router.
To connect with WiFi:

Make sure that the WiFi LED 

 on the modem router is lit. Find the 

modem router’s preassigned WiFi network name and password on the label 
on the modem router. 

Open the WiFi connection manager on your computer or WiFi device, 
find the modem router’s WiFi network name, and use the modem router’s 
password to connect.

Launch a web browser. If the NETGEAR installation assistant does not display, 
visit 

www.routerlogin.net. If a login window displays, enter admin for the 

user name and 

password for the password.

Follow the NETGEAR installation assistant steps to connect to the Internet.
If the modem router does not connect to the Internet, see the user manual, 
which is available online at 

, or 

 for help.

Connect the DSL port on the modem router to a DSL outlet.
If your package came with a DSL microfilter, install the DSL microfilter and 
connect it to the DSL port on the modem router. You can also connect a phone 
to the DSL microfilter.