Netgear D6000 – AC750 WiFi Modem Router - 802.11ac Dual Band Gigabit Manual Do Utilizador

When you turn on the power, the LEDs light as described here.

When power is first applied, the Internet LED 

 lights solid green for about 20 seconds 

and then starts blinking.

After approximately 25 seconds after turning on the power, the following occurs:

The WiFi LED 

 lights green.

The WPS LED 

 lights green.

If the modem router is connected to an active ADSL service, the DSL LED 

 blinks 

green to indicate that the modem router is negotiating the best possible speed on the 
DSL line. If the negotiation completes and a DSL link is established, the LED turns 
solid green. If you do not use a DSL modem but a cable or fiber modem, the DSL LED 
remains off.

After approximately 40 seconds after turning on the power, the Ethernet LED 

 lights 

green for any Ethernet devices that are connected.

After approximately 80 seconds after turning on the power, the Power LED 

 lights solid 

green, indicating that the startup procedure is complete.

When an Internet connection is established, the Internet LED 

 lights solid green.

If the Power LED 

 and other LEDs are off when your modem router is turned on, do the 

following:

Check that the power cord is correctly connected to your modem router and that the 
power supply adapter is correctly connected to a functioning power outlet. 

Check that you are using the 12 VDC 1.2A power adapter that NETGEAR supplied for 
this product.

If the error persists, a hardware problem might exist. For recovery instructions or help with a 
hardware problem, contact technical support at 

If the WiFi LED 

 remains off, check to see if the radios on the modem router are turned off 

LED lights solid green.