Netgear D6000 – AC750 WiFi Modem Router - 802.11ac Dual Band Gigabit Manual Do Utilizador

Click the Apply button.

Your settings are saved.

Click the Test button to test your Internet connection. 

191.

The maximum transmission unit (MTU) is the largest data packet a network device transmits. 

When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If a device in the data path uses a lower MTU 
setting than the other devices, the data packets must be split or “fragmented” to 
accommodate the device with the smallest MTU. 

The best MTU setting for NETGEAR equipment is often the default value. In some situations, 
changing the value fixes one problem but causes another. 

Get Dynamically from ISP

Your ISP uses DHCP to assign your IP address. Your ISP automatically 
assigns these addresses.

Use Static IP Address

Your ISP assigned a static IP address. Enter the IP address and IP subnet 
mask.

Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their names. 

Get Dynamically from ISP

Your ISP uses DHCP to assign your DNS servers. Your ISP automatically 
assigns this address.

Use These DNS Servers

If you know that your ISP does not automatically transmit DNS addresses 
to the modem router during login, select this option and enter the IP 
address of your ISP primary DNS server. If a secondary DNS server 
address is available, enter it also.

NAT (Network Address Translation) 
NAT allows computers on your home network to share the modem router Internet connection. NAT is 
enabled by default because it is needed in most situations. Select the NAT settings:

Enable. NAT is enabled. This is the default setting.

Disable. NAT is disabled.