Netgear WNCE4004 - N900 Video and Gaming 4-Port WiFi Adapter Guia Da Instalação

Installation Guide

Wait until the Link LED on the

button

WPS

 

Push the WPS button on your router. When the

Connect the WNCE4004 

wireless connection has been established, the
Link LED changes color to indicate the quality of the 
connection—solid green, solid amber, or solid red. 
See 

Link LED Activity 

on the reverse side of 

this document for more information about what these 
colors mean.

to your TV, Xbox, or Blu-ray
player with the Ethernet
cable (included) and the
power adapter. 

WNCE4004 blinks green. Press 
the WPS button on the 
WNCE4004. The WPS LED 
blinks blue to show that the WPS 
is running.

Congratulations! Your installation is complete.

If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the 

 or 

 symbols on the router to make sure that the

NETGEAR router supports WPS. For non-NETGEAR routers, refer to the user manual to determine if the router supports WPS. 

Once you know whether your router supports WPS, choose the appropriate installation method.

WPS (Wi-Fi Protected Setup) is a simple and secured way to connect a device to an existing network.

On the computer you will use to install the WNCE4004, disconnect 

                     its wireless connection to the router and/or remove any Ethernet cable
                     currently connected to the computer. You can restore the connection 
                     after the WNCE4004 installation is complete.

:    Connect the WNCE4004 to your computer, using the Ethernet

                    cable (included) and the power adapter.

Wait until the Link LED blinks green. Make sure that the computer 

                     gets the IP address. Then, open your Internet browser—it 
                     automatically takes you to the setup page. (If not, manually type
                     

as the browser address.) The default 

                     user name is admin and the default password is password.
                     Follow the instructions on the setup page, then return to this guide
                     and continue to Step 4.

Disconnect the Ethernet cable from your computer.

Connect the WNCE4004 to your TV, xBox, or Blu-ray player.

Congratulations! Your installation is complete.

button

WPS

 

NOTE: Make sure that you go through the connection settings on your TV, Xbox, or Blu-ray player after the WNCE4004

is configured and connected. If asked for the type of connection, make sure that Wired is selected.

 
Link LED

Ethernet

ports

button

WPS

Power 
jack

Ethernet cable

Power 
adapter

 WNCE4004

LED

WPS