Netgear WNDR3700v3 – N600 Wireless Dual Band Gigabit Router Guia Da Instalação

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of 

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to 

change without notice. Other brand and product names are registered trademarks or trademarks of their 

respective holders. © 2011 NETGEAR, Inc. All rights reserved.

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 

this product should be treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

1.  In the address field of your browser, type http://www.routerlogin.net and click Enter. 
2.  Enter the router User Name admin and 

default Password password to open your 
router’s main settings page. 

3.  When the main settings page opens, you will 

be asked if you want to “Check for Update.” 
Click Cancel. You can always check for new 
firmware later after you are connected to the 
Internet. 

4.  Select the first menu item on the left: Setup Wizard. Make sure Yes is selected. Then 

click Next and follow the prompts to complete the Setup Wizard.

When the Setup Wizard has completed detecting your connection, the Basic Settings 
page displays showing your settings. You are now connected to the Internet.
Note: If your ISP requires that you enter a User Name or Password, you will be 
prompted to enter this information. If you do not have this information, contact your 
ISP. 

After connecting to the Internet, you can check for firmware updates by selecting Router 
Upgrade and following the on-screen prompts.

You should set up a secure wireless network. Once your router security is established, your 
wireless laptops, gaming devices (such as Wii or Play station 3 with wireless), or other 
wireless equipment can safely and securely connect to the Internet.
1.  From the main menu page, select Wireless Settings.* 

2.  First, name your wireless network. (For dual band routers, you will define both the 2.4 

and 5GHz wireless networks.) Choose a name that is easy for you to remember. You 

might want to write it down here: ___________________________ (the default name 

is NETGEAR).

3.  Select your security method. NETGEAR recommends WPA-PSK (TKIP) +WPA2-PSK 

(AES). Then, enter a Passphrase. In the example, we entered HomeNetwork. You might 

want to write your Passphrase down here:________________________.
Note: Name (SSID) and Passphrase are case sensitive. Your Network name, Security 

method and Passphrase must be the same on all the wireless devices connected to your 

router.

4.  Perform steps 2 and 3 for both wireless networks, and click Apply. 

*Your router menu may display different or additional features not shown in this image.

   Enter your wireless information here:

   Wireless Network Name (SSID) ______________________________
   Wireless Security Passphrase ________________________________
   If you don’t remember your Passphrase, type http://www.routerlogin.net into 

   your browser and log in by entering your User Name admin and Password 

   (default is password). Then, select Wireless Settings to retrieve your Passphrase.

You can add wireless computers and other equipment to your wireless network: 
1.  Open the wireless software that manages your wireless connections on the wireless 

device (iPhone, laptop computer, gaming device) that you want to connect to your 

router. 

2.  The wireless software will scan for all wireless networks in your area. Look for your 

network—the one you named when you set up your router. Select it.

3.  If you set up security, you will be prompted for a Passphrase or network key. Enter the 

Passphrase you selected and click Connect. 

If your wireless device supports WPS (WiFi Protected Setup)—NETGEAR calls this 
method Push 'N' Connect—you might be prompted to press a WPS button on the router 
instead of entering a Passphrase. Then:
1.  Press the WPS button on the router. It will look similar to 

 or 

.

2.  Within 2 minutes, follow the wireless software instructions on the wireless device to 

complete the WPS process. 
The device will then be connected to your router. Repeat this process to add other 

wireless devices.

After installing your device, go to 

. Registration is required 

before you can use our telephone support service. Go to 

 for 

product updates, documentation, and support.
For complete DoC visit the NETGEAR EU Declarations of Conformity website at: 

For GNU General Public License (GPL) related information, visit