KitchenAid 25.4 cu. ft. 35 1/2" Width Standard-Depth Architect® Series II Ilustrações Dimensionais
Side by Side Refrigerator
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
LOCATION REQUIREMENTS
KSRA22KN
KSRA25KN
KSRB22FR
KSRB25FR
KSRD22FK
KSRA25KN
KSRB22FR
KSRB25FR
KSRD22FK
KSRG22FK
KSRG25FK
KSRG22FT
KSRG25FT
KSRG25FK
KSRG22FT
KSRG25FT
Electrical:
A 115 Volt, 60 Hz., AC only 15 or 20
amp fused, grounded electrical supply is required.
It is recommended that a separate circuit serving
only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use
an extension cord.
It is recommended that a separate circuit serving
only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use
an extension cord.
Water:
A cold water line with water pressure
between 30 and 120 psi (207-827) is required for
the water dispenser and ice maker.
the water dispenser and ice maker.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
40 to 60 psi (276 - 414 kPa).
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
40 to 60 psi (276 - 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. 2318581
02-13-07
2" (5.08 cm)
(1.25 cm)
To ensure proper ventilation for your refrigerator, allow for
¹⁄₂" (1.25 cm) space on
each side and at the top. (At the top, when using half depth cabinet, use top of
cabinet height “D” dimension. When using full depth cabinet, use overall “E”
dimension.) When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm)
minimum on each side (depending on your model) to allow for the door to swing
open. If your refrigerator has a water dispenser and ice maker, allow extra space at
the back for the water line connections.
cabinet height “D” dimension. When using full depth cabinet, use overall “E”
dimension.) When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm)
minimum on each side (depending on your model) to allow for the door to swing
open. If your refrigerator has a water dispenser and ice maker, allow extra space at
the back for the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor
in a location where the temperature will fall below 55°F (13°C).
in a location where the temperature will fall below 55°F (13°C).
E
overall
D
top of
cabinet
C
B
not incl.
handle
A
Depth
Cab. Width Door Width Cab. Height Overall Height
Model size
"A"
"B"
"C"
"D"
"E"
KSRA22KN
33 1/4"
32 3/4"
33 1/4"
65 7/8"
67 1/4"
KSRA25KN
33 1/4"
35 1/2"
36"
68 7/8"
70 1/4"
KSRB22FR
33 3/4"
32 3/4"
33 7/8"
65 7/8"
66 3/4"
KSRB25FR
31 3/4"
35 1/2"
36"
68 3/8"
70"
KSRD22FK
31 3/8"
32 3/4"
33 1/8"
65 7/8"
66 3/4"
KSRG22FK
31 3/8"
32 3/4"
33 1/8"
65 7/8"
66 3/4"
KSRG25FK
31 3/8"
35 1/2"
35 7/8"
68 7/8"
69 3/4"
KSRG22FT
31 3/8"
32 3/4"
33 1/8"
65 7/8"
66 3/4"
KSRG25FT
31 3/8"
35 1/2"
35 7/8"
68 7/8"
69 3/4"
Dimensions “D” and “E”
include rollers extended 3/4".
include rollers extended 3/4".
®