KitchenAid 15'' Automatic Ice Maker, Architect® Series II Guia Da Instalação

6. Remove the screw and door stop at corner D. Remove the 

screw and end cap at corner B. Place the door stop at corner 
B, and tighten screw. Place the end cap at corner D, and 
tighten screw.

7. Depending on your model, the brand badge for the front door 

of your ice maker may be in the package with the Use and 
Care Guide. Fasten the brand badge to the door.

8. Set the door aside.

1. Unscrew and remove the top hinge. Replace the screws in the 

empty hinge holes.

2. Remove the screws from the bottom of the opposite side of 

the ice maker cabinet. Turn the top hinge upside down so that 
the hinge pin points up. Place the hinge on the bottom 
opposite side of the ice maker and tighten screws.

3. Remove the “old” bottom hinge screws and hinge. Replace 

the screws in the empty hinge holes. 

4. Remove the screws from the top of the opposite side of the 

ice maker cabinet. Turn the hinge upside down so that the 
hinge pin points down. Place the hinge on the top opposite 
side of the ice maker and tighten the screws.

5. Remove the top hinge pin.

1. Place the door on the bottom hinge pin.
2. Align the door with the top hinge hole and replace the top 

hinge pin.

3. Replace the handle and handle screws.

1. Place the door wrap flange onto the door top and ensure that 

it fits correctly.

2. Rotate the door wrap downward until it covers the door 

surface completely.

3. Install the two hex-head screws into the bottom of the door.

1. Remove the white decorative screws from the opposite side of 

the door and set aside.

2. Remove the screws from the magnetic door catch and replace 

it on the opposite side of the door.

A

B

D

C

A

C

D

E

B

A

B

E

D

C