KitchenAid Gold® 30-inch Vented 300-CFM Under-Cabinet Hood Ilustrações Dimensionais

Page 1 of 2

Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation 
Instructions packed with product. Specifications subject to change without notice.

Ref. W10320576 

3/16

GXU7130DX

 

■

A 120 Volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

Vent system can terminate either through the roof or wall. Use 3¼" x 10"  

(8.3 x 25.4 cm) with a maximum vent length of 35 ft (10.7 m) or 6" (15.2 cm)  

or larger round vent with a maximum length of 50 ft (15.2 m) for vent system.
NOTE: Flexible vent is not recommended. Flexible vent creates back pressure and air 

turbulence that gently reduces performance.
The ducting from this fan to the outside of the building has a strong effect on the air flow, 

noise and energy use of the fan. Use the shortest, straightest duct routing possible for 

best performance, and avoid installing the fan with smaller ducts than recommended. 

Insulation around the ducts can reduce energy loss and inhibit mold growth. Fans installed 

with existing ducts may not achieve their rated airflow. 

Ensure duct joints and exterior penetrations are sealed with caulk or other similar material 

to create an air-tight path and to minimize building heat loss and gain and reduce the 

potential for condensation.
Place/wrap insulation around duct and/or fan in order to minimize possible condensation 

buildup within the duct, building heat loss and gain

A

B

D

C

E

A

B

C

D

E

F

F

To calculate the length of the system you need, add the equivalent feet (meters) for each 

vent piece used in the system.

45° elbow

2.5 ft (0.8 m)

90° elbow

5 ft (1.5 m)

6" (15.2 cm) or larger wall cap

0 ft (0 m)

3

1

/

4

" x 10" (8.3 cm x 25.4 cm) to 6" (15.2 cm) 

or larger

4.5 ft (1.4 m)

3

1

/

4

" x 10" (8.3 cm x 25.4 cm) to 6" (15.2 cm) 

or larger 90° elbow

5 ft (1.5 m)

1 - 90° elbow

= 5.0 ft (1.5 m)

1 - wall cap

= 0.0 ft (0 m)

8 ft (2.4 m) straight

= 8.0 ft (2.4 m)

Length of 7" (15.2 cm) system

= 13.0 ft (3.9 m)